To flash a virgin Ihub:
You need to connect the Ihub to the reciever
go into IP Config screen
Change Static to DHCP and then press ok on apply
You will now have a DHCP address in the correct range

The default static IP on the Ihub is 192.168.11.X
The 11 is out of most peoples ranges and when you try to flash it
You will corrupt your Ihub

If you have alread corrupted your Ihub
meaning when you turn it on and it doesn't recognize it (no Ip config under installation)
Then you need to fix it using this:

Open up the Wiznet flash config tool
note your Ihub's information

local ip: 192.168.11.2
Gateway: 192.168.11.1

these values will only work with a network that are 192.168.11.X
Since these values don't match my network I changed it to settings that match my network

Local Ip: 192.168.1.102
Gateway: 192.168.1.1

If you don't know your range or gateway then hit the start menu on the bottom of windows
find the run tab
type in cmd.exe
a black DOS window will open
now type in ipconfig
use the information in the window to change the value in your Ihub
after you are done then left click on the setting button on the bottom of the Wiznet config tool
It will tell you processing and then you can research and see that indeed the IP address has been changed

__________________

Please don't PM me with fta related questions, ask them in open forums so others can benefit from them too.