Originally Posted by djtarry

"If you have this bird already homed in, which it looks like it by first post, check your port and see if it is set right and also how strong is your quilty for this bird? Let us know this also."

How can I verify that if the port is set right for this bird ?and I am assuming that you are referring bird to Dish?

(I'm referring to bird as to the sat you are homing in at the time)
(as for your port, you should set it to what you have connected to outside on your switch, like if 119 is on port 1, 110 on port 2, 61.5 on port 3, etc... but remember that you have to
match these settings/ports outside as well as inside)


is there any similar setting information for Echostar 3 (61.5) as given in one of your link for 110 and 119

(set everything up as you did for 110/119 difference being the port setting and tp freg. you may have to change tp freg. to show lock on 61.5, try 12355 and see if it locks on that bird, we did scan it on our elite and we got 612,617,619 to come in, however, it is raining here really hard and quality was very low.)


Eg:
does anyone has a seeting for 61.5 which is similar to the one i have found for 110 and 119

Tuner1
119
lnb type OCS-DP
Connection type Seperator
lnb freq 11250
TP 12239
22khz off
diseqc port 1
If you see good S&Q and says 119 in blue box on right, press the small red button on the remote to scan for channels. Save and go on to 110


110
lnb type OCS-DP
Connection type Seperator
lnb freq 11250
TP 12224
22khz off
diseqc port 2
If you see good S&Q and says 110 in blue box on right, press the small red button on the remote to scan for channels.