I been all over the place trying to get some info on 129, this is what i found:

c/p

If you go to lyngsat.com and look at ciel 2, 129 AKA echo5 you will have to change 5 or 6 tp settings to get all channels. They updated march 3rd I think it was Good luck!!!!!!!


C&P about CW 3000\4000
====================
Echostar 5 has been replaced by Ciel 2 at 129. They now have a full complement of 32 transponders at that slot with 16 conus and 16 spots on that bird. Echostar 5 only had 26 available conus TPs. Channels moved all over that bird. The current TP list on the CW-LMC is for Echostar 5. You'll be missing 135 channels or so with it. Here's the current Ciel 2 TP list:


For those paying close attention, the duplicates are spots. Which one works depends on where you live if either works at all. You can fix all this through the add/edit functions on the system.

When you want to add transponders to your CW3000 or 4000 use WinSCP to log on your box then go to captive/config/dvb/satellites then double click on the sat you want to add TP's to. Add the new TP's in the same format and save. Exit out and restart your box and your new TP's will be in your scan list for the sat you added them to.

You can add transponders on the box by using edit button at the side of the scan button, but in order to save your newly added TP's you have to add an offset. An offset is a real pain because it throws your channels into a seperate numbering category for instance if you used an offset of 10000 your channel number say 549 normally for that sat would now be 10549 instead of coming after channel 548 (if 548 was on a different sat).
With DN the channels coincide so you do not have to set an offset. You will not get double channels.

__________________

• Want to know when the new FTA Fix files are posted?
• General Helpful Hints on Forum Posting