This File is just for Dongle, If no Dongle PLEASE DO NOT USE
NO EMU in this file
please Clean your receiver (Factory Default),
Load the File
Scan Sat's
config your receiver options
exit to main Screen
wait 5 Second (aprox) to software read the dongle (NO MESS IN TV)

INFO + 0 = Server Status Display
INFO + 1 = Your Private Server Info (up to 40 )
INFO + 2 = your IP STATUS

(Newcam for privates Servers)
(G-Share is a CW exclusive Protocol)

NO DONGLE , NO MENUS

NO Public Server available (yet)




The new Fix. Unzip the file before loading.

Load the new file and set auto roll to "ON" and wait up to 15 min for the keys to auto roll.

Make sure that the Auto Roll feature is turned "ON." You will find the Auto Roll feature in the Menu options.

If you don't have the picture after 15min Reboot your system using the switch at the back of the receiver.
Click here for the troubleshooting guide.

* Change*
( Main software upgrade )

- AR Fixed
Note:

- Always use Remove Device Safely function in USB Menu before remove USB drive (thumb drive/USB HDD)

- Always format USB thumb drive before any update

- Do not extract file direct on to the UBS thumb drive, extract to a folder then copy to USB thumb drive.

- Do a hard reboot (power OFF-ON using rear switch) after every update

Attached Files

CW800SV2.45_2009_12_29.zip (1.04 MB, 11 views)

__________________