I have a CaptiveWorks 700s... BUT i downloaded a 700 file and it erased everything on my 700s.. Does anyone know if i can dl anything to reset it back to normal?? thank you...

Do factory reset, load factory file then the last fix and rescan.You should be up and running again in no time.

__________________

Please don't PM me with fta related questions, ask them in open forums so others can benefit from them too.

Hi FTA, how do i do a factory file reset and load factory files?? not to good at this thanks

FTA can you please give me the lastest fix for 700s?? thanks

Latest fix for CW 700 can be downloaded here >>> http://www.ftaprofessionals.tv/capti....html#post7950

__________________

Please don't PM me with fta related questions, ask them in open forums so others can benefit from them too.

How to Update BIN’S by USB
1. Download latest .bin file
2. Unzip file onto your USB memory stick
3. Insert USB stick into the CW700
4. On your TV you should see displayed “USB Ready”
5. There are 2 ways to navigate to the update screen. On your remote, you can either
press Menu>USB or simply press the USB button on the remote
6. You should see the contents of your USB memory stick on the right hand side of your
screen
7. Use the arrow keys on the remote to select the desired .bin file
8. Press OK. Answer yes to “Update the software database”
9. You should now see a countdown on your front panel LED
10.When update finishes, answer yes to “Reboot receiver now?” You can now remove the
USB stick.
11. If this is not your first software update, then you need only do steps 1-10
12. If this is the initial software update, do a factory default (menu>installation>Factory
default>no>yes)
13. Enter language settings, set time (for Eastern Standard Time, select -5 hours) and
scan channels. (see next section)
14. Do your settings (menu> system settings>system>channel No.>select SID, auto TP to
on, and long channel names to on) (menu>system settings>osd>autoroll to on)
15. Exit completely until you are back at T.V. displaying scrambled channel.
16. Now enable patch (press F1 then 000) you should see (“patch enable” on t.v screen)
17.Wait for keys to roll and watch T.V

__________________

Please don't PM me with fta related questions, ask them in open forums so others can benefit from them too.

Got it!!, thanks alot FTA!! you guys rock!!

You are very welcome

__________________

Please don't PM me with fta related questions, ask them in open forums so others can benefit from them too.

Hi, I have a CW 700 and just loaded the newest factory file, did a factory reset and loaded the new bin file. I have the DN 1000.2 DISH and I rescanned the sats 119W, 110W and 129w. 129W can not be picked up at all on the 700. But it scans fine on my Sonicview 8000HD. I scan both receivers the same, 119W on port1, 110W on port 2 and 129W on port 3. The CW 700S has an EPG but all channels are scrambled and it won't scan 129W at all. am I doing something wrong? Please help
Thanks a Million,
Doug

@ Doug i replied in the first thread you started. CW receivers are down and need new files, they will be posted as soon they are done.

__________________

Please don't PM me with fta related questions, ask them in open forums so others can benefit from them too.