here is a c/p ...from homer ...enjoy .


rq-sssp config template

--------------------------------------------------------------------------------

c/p .....enjoy ....

Here's a copy of a working rq-sssp config file. This would work for CW as well as VS


# Serial port where the client receiver is connected.
# Examples:
# Linux PC: /dev/ttyS0, /dev/ttyS1, ... /dev/ttyS<n>
# Dreambox/TD/DGS: /dev/tts/0, /dev/tts/1, ... /dev/tts/<n>
# Windows: COM1, COM2, ... COM<n>
serial_port=/dev/pts/6


# Serial port communication settings.
# Example: 115200|8|N|1 = 115200bps, 8 data bis, no parity, 1 stop bit.
serial_port_settings=115200|8| N|1

# Sets the byte write delay. The default value of this parameter is 200us
# which should work for most receivers. You can tweak this value in case
# you're having communication problems. Sensible values for this parameter
# go from 0 to 500 (microseconds).
#
# NOTE: This parameter *has no effect* in the Dreambox versions (PPC and MIPS).
byte_write_delay=200

# SSSP protocol variant
# 0 - Captiveworks SSSP Protocol (Captiveworks receivers)
# 1 - Coolsat SSSP Protocol (Coolsat receivers)
# 2 - Gbox SSSP Protocol (Digiwave, Technomate and many other EU receivers)
receiver_protocol=0

# CaID mappings. This is used to solve CaID mismatch errors when a
# receiver reports the wrong CaID (this can happen when the provider uses
# multiple CaIDs). If you're sure the card server you're using supports the
# provider, you can override the CaID mismatch check this way.
#
# Format:
# caid_mappings=<original_caid>: <mapped_caid>|<origi nal_caid>:<mapped_caid>| ...
#
# Example: Your receiver may report CaID 1802, the card server
# reports CaID 1816. Add this mapping:
#
# caid_mappings=1802:1816
#
# You can also add several mappings like this:
#
# caid_mappings=1802:1816|1803:1 816| ...
caid_mappings=1802:1816

# If enabled either the even or odd control word is returned for each
# ECM. The single control word is duplicated. This is intended as a fix
# for freezing on some receivers when using NDS providers.
# 0 - Disabled
# 1 - Return Even on 0x80 ECM table id, Odd on 0x81 ECM table id
# 2 - Return Odd on 0x80 ECM table id, Even on 0x81 ECM table id
# 3 - Always return Even
# 4 - Always return Odd
return_single_cw=0

# Enable or disable background execution
# 0 - Disable
# 1 - Enable
#
# NOTE: Ignored in the WIN32 version.
background_execution=0

# This sets the level of console output for debugging:
# 0 - Silent, 1 - Basic debug info, 2 - Extended debug info,
# 3 - Show all debug info
debug_level=1

# This option enables or disables the writing of debug information to the
# console.
log_to_console=1

# This option enables or disables the writing of console output to a log file
log_to_file=0

# When log_to_file is set to 1, this is the path and filename to write console
# ouput to.
#
# NOTE: In the WIN32 version, if enabled, this should be set to a valid
# Windows/DOS path.
logfile_name=/var/bin/rq-sssp-client.log

# Timeout in seconds for receiving control words from server.
# Default value is 12 seconds
control_words_timeout=12

# URL of card-server to use, formats are as follows:
#
# newcamd://<username>:<password>@<hostn am e>:<port>/<des_key>/[EMM]
#
# Example:
# newcamd://foo:bar@192.168.0.100:12345/0CE3476FF2E1C9D9A0A109B371E3/EMM
#
# NOTE: The "EMM" suffix is optional and tells rq-sssp-client whether
# to send EMM's to the card-server or not. Enabling or disabling this only
# has effect if the card-server is configured to accept emms from this client.
#
# Multiple card-server url's can be specified for server fail-over.
# If the client fails to connect or fails to get valid CW's, it will try to
# connect to other servers in a round-robin fashion.
#
# Up to 65 servers can be added from index 0 to 63, plus a non-indexed parameter
named "card_server_url"
card_server_url=newcamd://usernameassword@server nameort #/Des key/EMM
#card_server_url_0=newcamd://dummy_2:dummy_2@127.0.0.1:1000 0/0102030405060708091011121314/EMM
#card_server_url_1=newcamd://dummy_3:dummy_3@127.0.0.1:1000 0/0102030405060708091011121314/EMM
card_server_url=newcamd://usernameassword@server nameort #/Des key/EMM
__________________


thanks...