Nano2 working files saved from a working Nano2 as of 2010.03.27
This is a working files saved from a working Nano2 as of 2010.03.27
The NPN file is for sats 91/110/119W, has the Channel/Transponder files included, and has been "Blind Scaned" for each satellite.
Write down your Nano2 settings BEFORE LOADING this file. (Menu - Diseqc switch, and Menu - Channel Search)

If you are having problems with your Nano2, unzip the file, put The NPN file on a USB thumb drive, insert it into your Nano2, with the Nano2 remote select - Menu - Utility - USB - high light this file (NPN_0327062309.NPN) and push "LIST OK". Allow the file to upload and the Nano2 to reboot.

The dish antenna setup is for a "Twin DishPro LNB", Diseqc1=119, Diseqc2=110, Diseqc3=91
All "Autorolls" & "EMU" = OFF
If necessary change the dish settings to your dish written down Nano2 setup (Menu - Diseqc switch, and Menu - Channel Search).

Included in the ZIP file is the Channel/TP file STB_DATA_0327062257.STB. This file has the TPs and Channels file for 91/110/119, that is derived from a blind scan performed on 2010/03/27. If your Nano2 is operating fine, just load this file to update your TP/Channel list.

Copy the STB_DATA file on a USB thumb drive, insert it into your Nano2, with the Nano2 remote select - Menu - Utility - USB - high light this file (STB_DATA_0327062257.STB) and push "LIST OK". Allow the file to upload and the Nano2 to reboot.

Attached Files

NPN_0327062309.zip (1.22 MB, 22 views)

__________________