If you ever get a message C107 on your receiver LED panel or you want to convert I-Link back to CNX Nano2 below has been tested and works.

c/p
If you've converted your nano 2 into an I-Link
and want to change it back to nano2
this also work for C107 lockup error.

to convert back when cxn server is up

Reinstall the original CNX server file.
Reconnect to your computer and null cable
Rename the beta file's extension from NPN to UPS and use the I-Link loader. Use force load.
it will install with ease(although it takes about 3-4 minutes

Thanks to our member Pals for the information below.

I renamed the latest Nano 2 factory file bin extension from NPN to UPS and loaded it on with the latest I-Link Loader. However, to make this work after turning on the receiver, you have to force load, then go to open button where the COM Port is and keep left clicking continously until green bar appears on the left side of loader. When green bar is full, receiver will be reset to original factory settings. Now, turn off receiver and then turn on for it to reboot, then load latest Nano 2 fix. Just to let you know that it is a tedious process and takes some patience to reset the receiver but it works.



Below is a Nano2 factory file already modified with *UPS* bin extension to be used only with the I-Link loader.I-Link loader below also.


The I-Link loader is in Spanish but you can change language.

Attached Files

	UPS_8.05_Factory.zip (1,022.7 KB, 13 views)
	i-link loader.zip (137.0 KB, 13 views)

__________________