C/P from XYPHEN:

Nano2 Conversion to Ilink Private Card Share

How To Convert A CNX Nano2 To Connect To A Private Card Share Server


1 - Hook the computer with a null cable to nano2

2 - Open the "MVision Tools Sx 2.11.exe" loader

2a - For Loader to appear in English, go to "idioma" button and select "ingles"... magic!.. lol..

3 - Open the Comm port

4 - Load the "IR220-2.80.ups" bin

5 - Click on force update

6 - Turn on the nano2

7 - Wait about 5 ~ 10 minutes... should turn off and then back on by itself (rebooting)

8 - When it finishes wait a minute more then turn off and turn back on....
Close Loader and remove cables.... hook up as normal then including dongle and cables.

9 - Setup your sats and switch and scan them.....

10 - Turn off the emu

11 - press Menu

12 - Go over to Options, then Down to Network and press OK

13 - Then Down again to Net Application and press OK

14 - Set, Type as Dream

15 - Softcam as newcamd

16 - Then enter cardserver IP, Port, DES Key, Username, and Password that your Card Server peeps provided you.

__________________

Please don't PM me with fta related questions, ask them in open forums so others can benefit from them too.