c/p

How to get the (C108) Back after rebooting.

If you have a converted nano2 to ilink.

ilink back to NANO2
Prerequisites:
you must have the ilink 2.84 bin installed

1. Reset to factory defaults.
2. Upgrade receiver using the following file through USB stick: ILINK_TO_NANO2.ups. Use "S/W Upgrade" option on upgrade screen.
3. Reset to factory defaults.
4. Upgrade receiver using the following file through USB stick: NPN_1.29.NPN . Use "S/W Upgrade" option on upgrade screen.
5. Reset to factory defaults. You are back to NANO2 NPN 1.29 .

I loaded this bin with a USB
.
1- load bin NPN_809 factory.NPN
2- factory default (very important)
3- load bin NPN_8.10_ factory. NPN
4- factory default ( very important)
5- load bin NPN_1.29.NPN.

Now convert back to nano2 to ilink
NANO2 to ilink

Prerequisites:
- You must have NPN1.29 FW installed.

Process flow:

[NOTE: All factory resets are very important, the first time I tried doing this it didn't work and it was due to this step so do it!]
1. Reset to factory defaults.
2. Upgrade receiver using the following file through USB stick: NANO2_TO_ILINK.NPN . Use "S/W Upgrade" option on upgrade screen.
3. Reset to factory defaults.
4. Upgrade receiver using the following file through USB stick: IR2x0_2.84.ups . Use "S/W Upgrade" option on upgrade screen.
5. Reset to factory defaults. You now have 2.84 ilink BIN installed. It is good to go.

This is how i fix the (C113) error and got it back to the (C108).

Thanks and enjoy.

credit to Whacked_out

__________________

Please don't PM me with fta related questions, ask them in open forums so others can benefit from them too.