Are you using latest fix and do you have R-Link dongle installed, if so try hard boot if it doesn't help check your settings. Try this as well
If it is a 22khz SW then turn 22kz OFF for 119 but leave ON for 110W off
If you are using a Diswqc Sw 4X1 then you are missing the Diseqc Settings, turn them on and Use Port 1 for 119W and Port 2 for 110W. Turn the 22Khz Sw Off for both
Make certain you have the correct Sat Signal Locked in (Displayed at the top right side of the Screen)
Now Auto Scan
See if CH 100 and 213 are in now, if not, read on.
If you are using DP LNBs, then please try LNB Type: OSC-DP (I think it is) if you have Q signal then Auto Scan and try Ch 100. again
__________________
Please don't PM me with fta related questions, ask them in open forums so others can benefit from them too.
|