Finally, the promised/long anticipated/awaited public file is here! Enjoy. This will make your tv viewer a bit more pleasant.

Simply download this file, perform a factory rest, and scan!

The old Q3 file won't work anymore. This file is a MUST upgrade.
New Channel lists will be posted soon, please do not load old channel lists as it may not work.

// begin release notes

***** IMPORTANT NOTE: *****
Dreambox DM100 - DM100S_MAIN_NA_V214A3C02.zip

***** This is the DM100 LATEST PUBLIC IKS file for North American Customers ONLY! *****

This ZIP archive contains 1 file(s)

File Description: Secure Public IKS server file for North America V214A3C02
File Name: DM100S_MAIN_NA_V214A3C02.bin

--- MAJOR FIXED ISSUES ----

- Much Improved scanning!
- Satellite ID / NIT (satellite name/id) shown in Antenna Setup (the S/Q now shows which satellite signal is coming in)!
- Sort by SID implemented. Channel numbers now come in with correct SID, similar to ECHOSTAR/BEV Packages!
- For a brand new receiver (in PAL mode), you can press 0+0+0+0+EXIT+EXIT to switch from PAL (rolling screen) to NTSC (PAL<NTSC) then do a factory reset!
- SAT FIND menu (sort by sat name/sat number)!
- New transponder update for most satellites
- During Stand-by - IP lost problem solved. You can turn off the receiver and the server connection won't be lost!
- Ability to upgrade to later on new software using FTP upgrade - Menu/Information/S/W update
- Improved DiSEqC support

Extra info:

Download, Extract, Upload, and Watch!

STEP 1 Download and extract this firmware on your PC
STEP 2 Open XLoader_32 and upload this latest firmware to your receiver
STEP 3 Connect the Receiver to TV and do a factory reset (A MUST) - Menu > System Settings > Factory Reset, Press OK!
STEP 4 Now you can scan channels or upload a channel list
STEP 5 - Enjoy some free TV!

---
1 - Make sure you have a solid signal
2 - Make sure you have IP for your DM100 (Menu > Installation > Expert Setup, Pin = 0000 > DHCP > OK!

The new IKS Fix File.

If you don't have the picture after 5min, reboot your system using the switch at the back of the receiver and make sure that you are connected to the IKS server.

• Click here for the troubleshooting guide.
• Click here for the how to unzip files instructions.
• Click here for the IKS explanation.

* Change*
( Main software upgrade )

Note:

- Always use Remove Device Safely function in USB Menu before remove USB drive (thumb drive/USB HDD).

- Always format USB thumb drive before any update.

- Do not extract file direct on to the UBS thumb drive, extract to a folder then copy to USB thumb drive.

- Do a hard reboot (power OFF-ON using rear switch) after every update.

Attached Files

Dreamboox DM100 Dongle FTA Fix Dec.30.2009.zip (1.44 MB, 3 views)

__________________