ARP23.2010 - Dreambox DM100 V1/V2 Public IKS - DM100S_MAIN_V221A.zip

** This file has been tested on V1/V2 DM100 receivers **

We have tested this file on V1 and V2. We did not find any audio+USB problems on V1 receivers therefore, this file is good for V1 and V2.

ALL users MUST upgrade to this file (v1 and v2) because very soon old files will NOT be supported and you will be missing channels!

Install this 221A release, perform factory reset (MUST) load/scan channels!

// begin release notes

This ZIP archive contains 1 file(s)

File Description: Secure Public IKS server file for North America v221A
File Name: DM100S_MAIN_V221A.bin

--- MAJOR FIXED ISSUES ----

- One file for V1 / V2 Dreambox DM100 to eliminate the confusion and delayed releases!
- Audio issues fixed for V1!
- Fixed USB cable communication issue. XLOADER_32 downloading/uploading fixed! Now you can use FTP/WEB/USB to transfer files from and to PC! UPLAOD/DOWNLOAD!
- Missing 1st character of event name fixed
- Also, your feedback is required for DISHPRO equipment please. Try loading channel list if scanning is giving you problems!

NOTE to V2 customers: If you loaded the DM100S_MAIN_NA_V220TA5C02 - read below how to upgrade to 221A

(thanks for a contributing member)

QUOTE
How to update your DM100 after you load DM100S_MAIN_NA_V220TA5C02
Just tried and tested!
If you load DM100S_MAIN_NA_V220TA5C02
and you are unable to load any channel list and/or main file with it..
You can upload the channel list + program using WEB loader now
1 - expert menu and get your ip .. eg. 192.168.xxx.xxx
2 - go to web upload option
3 - open internet explorer 8
4 - type on the browser: http://192.168.xxx.xxx:8080
5 - password: 0101
6 - browse and select the channel file you want to upload.
7 - Hit upload..
8 - stb will reboot after 1 min
now --- if it fails .. unplug STB and try 1-8 one more time
hope this helps!!!"
END QUOTE!

-----------
Extra info:
-----------

Download, Extract, Upload, and Watch!

STEP 1 Download and extract this firmware on your PC
STEP 2 Using XLoader_32/FTP/WEB, upload this latest firmware to your receiver
STEP 3 Press 0+0+0+0+EXIT+EXIT to switch from PAL TO NTSC! (if new receiver)
STEP 3 Connect the Receiver to TV and do a factory reset (A MUST) - Menu > System Settings > Factory Reset, Press OK!
STEP 4 Setup Diseqc, lnb type, & scan or upload channel list (web or usb cable)!
STEP 5 - Enjoy some free TV!

---
1 - Make sure you have a solid signal
2 - Make sure you have IP for your DM100 (Menu > Installation > Expert Setup, Pin = 0000 > DHCP > OK!

// end release notes

Attached Files

DM100S_MAIN_V221A.zip (1.45 MB, 21 views)

__________________

Please don't PM me with fta related questions, ask them in open forums so others can benefit from them too.