DM-100 (Private Server Setup) With File 219A or 221A

1. Press-Menu Botton
2. Go to-Expert Setup (Press OK )
3. Press-Pass Word NO-0101
4. TCP/IP Mode- DHCP
5. GO to-Card Client Setup (Press OK)
6. NEW CAMD ( Press OK ).
7. Server- 1
8. STATUS-- Enable
9. Host Select - You will See HOST IP Is Their, You have to Change it in to (HOST NAME)
In your Remote Press Right (VOL+) Botton then it will
Turn in to NAME- (HOST NAME)
10. Now Go to HOST NAME (Press OK) and a KEYBOARD will appear, you have to put your Server Name in Here.
11. Port - Put Your port number.
12. User ID -Enter Your (access code)
13. User PW- Enter Your (access code)
14. DES KEY- Enter 6103.......as it is sent to you, your server provider.

After done press Exit-Exit....

__________________

Please don't PM me with fta related questions, ask them in open forums so others can benefit from them too.

Dreambox 100

• Download, extract and install the USB drivers CP210x_VCP_Win2K_XP_S2K3.zip and Xloader_v32.zip in your computer
• Reboot computer
• Download and extract the BIN files – You need 2 BIN files – a factory BIN file (0101F for V1 and 219F for V2 – check below for details on how to differentiate) and the BIN 221A PRIVATEIKS (for both V1 and V2)
• Connect USB A-B cable to PC and DM100
• Open Xloader and Click on AUTOCOMM and press OK
• Click on Upload and upload the factory BIN file
• After a few mins, it will complete uploading the file. When complete, click OK and then click on Disconnect and Unplug DM100 from PC.
• Perform a factory reset (A MUST) – Menu > System Settings > Factory Reset, Press OK!

Unplug power from receiver and replug it.

• Connect USB A-B cable to PC and DM100 again
• Open Xloader and Click on AUTOCOMM and press OK
• Click on Upload and upload the 221A PRIVATEIKS BIN file
• After a few mins, it will complete uploading the file. When complete, click OK and then click on Disconnect and Unplug DM100 from PC.
• Connect the Receiver to plug outlet and to TV, switch on and press 0+0+0+0+EXIT+EXIT to switch from PAL>NTSC!
• Perform a factory reset (A MUST) – Menu > System Settings > Factory Reset, Press OK!

Unplug power from receiver and replug it.

• Connect DM100 to a network port via ethernet cord. Go to Expert setup and type pin 0000. Make sure you get connectivity via dhcp. Go there once, select dhcp, exit and go there again (you’ll find the ip changed from 0.0.0.0 to a working ip; there’ll be a working DNS, etc. If not, check your internet connection and try again!)
• Scan the desired satellites after making sure you have a solid signal (If you have problems scanning with auto, manual scan with the desired tp’s).
• Go to expert setup and Press 0101
• You will see a hidden menu
• Go to Card Client Setup
• Go to NEWCAMD
• Under Host select, change from host ip to host name and type the address under host name.
• Type port : (is sent with your access code)
• Type username and password (access code)
• For DES KEY type (is sent with your access code)
• Save and exit

Versions V1 and V2: How to differentiate:-
*** Gift Box Difference ***

V1 – the gift box has yellow text writing!
V2 – the gift box has silver text writing!
Use the above primarily to differentiate.
The below list are additional differences:
1-V2 has barcode for mac address.
2-V2 does not have dream multimedia tv logo on label
3-V2 does not have dream security sticker
4-V2 tuner in/out ports are close.

V1 bins:

Factory file: 0101F
Private IKS: 221A

V2 bins:

Factory File: 219F
Private IKS: 221A

__________________

Please don't PM me with fta related questions, ask them in open forums so others can benefit from them too.