|ChatBox Sonicview Conaxsat Nanosat Viewsat i-Link DreamboxLimesat Topsat AzBox Satzen X-Factor|
How to Populate DreamLink HD EPG's
Populate your Dreamlink's EPG
-Go to channel 200 or 239 for DN
Then go into the EPG and using the red button make sure you are in normal view, not list view...
Then hit the yellow button which is dish epg, and do not change the channel for about 10 minutes or so.
You can stay in the EPG menu or exit, seems to make no difference..
You should then have a 4 to 9 day EPG...
-Channel 9447 or 9464 seems to work pretty good for the 129w sat, from TP 12588
______________________________ ____________________ __________________________
-For Bev 91 EPG
Let it sit on 1050 and then hit blue button in epg and it works as well as dn.
For Bev 82 EPG
First go to channel 896 CBC HD--- leaving and the EPG showing, you'd then go to sat 91w and channel 50 (b3v EPG). That is the same TP value as the 82w's CBC HD channel.
Let it sit on that 91w channel for a few minuites then go back to the CBC HD channel on 82w and you should then see that the 82w's EPG has been populated.
|The Following User Says Thank You to Ekim For This Useful Post:|
FTA PRO (02-13-2012)
|Rate This Thread|