i was told by one2 that i have to set my dish i have a 33 dish w motor he said that to move the motor and the dish together to 119 or the strong on the sat finder my question is do u have to move the motor and dish together on o or the 30.1 azimuth

undo the 7/16 nuts on the adjustment on the dish mounting bracket.turn the dish by hand. there is a elevation scew on the mounting hardware. do not turn the dish by the motor. look at your compus and align to degree.look in the posting (how to set up a dish). there are plenty of help there.

@ studmuffen50 there is a lot of useful info here you just have to look for it and read. I already gave you the links on how to set up your dish&motor. And i am asking you again, please don't start multiple threads with the same question. One thread will do. Here is the link again and use search button as well, it helps. >>> Dishes & LNBs - FTA Fix Files FTA Keys and FTA Instructions for FTA Receivers

__________________

Please don't PM me with fta related questions, ask them in open forums so others can benefit from them too.

i starter a new thread i must not unstand thread i touth is have been on fta general discussion this is where i get The in formation from it the same as my manual i have not Q LOST OF S me and my friend work on set Q 3 HOURS FOUND ON THE SAT FINDER 10 + ON 119 ON THE ELEVATION start on 30 move every line up and ever line down and e to w on each line on Q one on the motor and one from lnb to receiver and o Q

I MOVING THE MOTOR AND THE DISH TOGETHER NOT BY THE MOTOR
I HAD A FRIEND COME HELP ME TONIGHT AND WE WORK ON GETTING Qfor 3 hours and got nothing we get the compus on 119 and move the dish there put on the sat find on it got 10+ move the elvation up and down to we got 10+ on the elvation not Q so we was on 30 elvation and we moved ever line ON THE ELVATION up and down each line we move e and w one with the lnb on the motor and to the receiver and did it one more time from lnb to the receiver and on Q I WOULD THING THERE SOMETHING WITH THE RECEIVER BUT I HAVE RECEIVED 97 W BEFORE NEED HELP ONE2 THANK U VERY VERY MUCH FOR THE HElp YESTERDAY U AND SAN IF I EVERY GET THIS TO WORK I BE VERY HAPPY IT NOT THE COST BECAUSE I HAVE CHARTER H D TV HAVE 3 YEARS TO GO I PAY $145.00 a month on charter i just like to get fta can u help have u ever see people that could get Q thank studmuffen

studmuffen it is fine to ask your question here in General discussion all i was asking it's not to start 4 or 5 posts with the same question. You have to make sure If you have a motor, you can use two different types of settings:

USALS automatically calculates where the motor must turn based on your longitude and latitude. Usually when you have your Motor set to USALS, you can press OK and enter this information.

DiSEqC 1.2 is used to move the dish with the remote control and manually store the location in the motor's memory once you have an optimal signal. In Viewsat and a few other receivers, this setting is called "User" or "Installer".

Legacy SW
This is the switch setting you use if you have a switch with a Dish Network or Bell ExpressVu logo that does not have a DishPro logo. If you are using a DiSEqC or DishPro switch, or if you have only one satellite (thus not using any type of switch), this should be set to "None" or "Off".

If you have a switch with a Dish Network or Bell ExpressVu logo that does not have a DishPro logo, select the setting that is appropriate.

You can read more about here >>> http://www.ftaprofessionals.tv/dishe...ide-lines.html

__________________

Please don't PM me with fta related questions, ask them in open forums so others can benefit from them too.

i read about all the lnb but i have yet to see about my lnb one single lnb dgl-780 lnb33 sat fta offset universal dish sg 2100 fta dish motor i read about the universal dish can u get 119 sat with is dish because i cannot get Q LOST OF S 99 thank studmuffen

That is your problem then you need different LNB, i know you were receiving 97w which uses Linear LNB, for DN you need Circular LNB.

__________________

Please don't PM me with fta related questions, ask them in open forums so others can benefit from them too.

i told many that i had a lnb dgl- 780 lnb and nobody said nothing work on this for 2 month being nice about the month it could be 3 from the first week i became a member is said no Q u can look it up if u like u take it one day at a time but if someone else said they have no Q u got the answer or tell them get with studmuffen 50 i have read and learn a lost and i have to learn lost more so live and learn i love u al san -one2 - pro fta all that i order a 4 in one lnb thank i be out about a week before my lnb come in i be back

Sounds good my friend, sorry if i missed your post where you said that you used Linear LNB, but when you named the channels you were receiving i knew all those channels are 97w and in order to get them you need linear LNB. 97W is a very hard sat to get so obviously your dish and motor are set up properly, once you get new LNB's you should be up and running in no time. Good luck and let us know if you need more assistance.

__________________

Please don't PM me with fta related questions, ask them in open forums so others can benefit from them too.