I am having problems setting up my dish 500 to my receiver. i have one coax cable coming out of the dish that is hooked to the 110 side of the dish which is the left lnb. that cable is connected to my disqc switch labeled lnb 1 and that goes to my box into the house. I am not sure if i need 2 cables coming out of my dish 500 to get both 110 and 119 satellites. or one will do coming out of the dish. i am not sure what the settings are suppose to be on the box for both satellites to work. can you please let me know if i have the satellite hooked up properly and if so, what the exact setting i should put in my box for each one to work. I have been testing for a while with other boxes and this 9000 plus box has me stumped.

Dish 500 has a built in diseqc, 1 port either the 119 or the 110 port can be used of the dp(dish pro) lnb.simply bring one line from either port and hook it directly into the LNB in port of your STB (receiver/set top box) with no splitters or switches.And instructions for I-Link 9000 Plus can be found here - How to setup ILINK 9000 Plus

__________________

Please don't PM me with fta related questions, ask them in open forums so others can benefit from them too.