DIAGNOSTTIC RELEASE
Load only if having promlems with KHub and 212

Important Instructions

- Load 213 by usb or serial port

-Power off receiver and KHub for 2 Mins

-Power on receiver and KHub

-Wait 10 mins

-If asked to reboot the KHub, power off and on the KHub
If after 10 mins there's no connection, check the settings to make sure DHCP is used

-Use DHCP and save settings

-Then power off receiver by remote control and power off KHub

-If necessary, a reset of your router may be required


The new IKS Fix File.


If you don't have the picture after 5min, reboot your system using the switch at the back of the receiver and make sure that you are connected to the IKS server.

• Click here for the troubleshooting guide.
• Click here for the how to unzip files instructions.
• Click here for the IKS explanation.

* Change*
( Main software upgrade )

Note:

- Always use Remove Device Safely function in USB Menu before remove USB drive (thumb drive/USB HDD).

- Always format USB thumb drive before any update.

- Do not extract file direct on to the UBS thumb drive, extract to a folder then copy to USB thumb drive.

- Do a hard reboot (power OFF-ON using rear switch) after every update.

Attached Files

k1plus_213_20091114.zip (998.0 KB, 1 views)

__________________