KBOX K1 Heros Plus - KHub - Setup To Get IKS

1. On your pc go to Start – Run – and type in "command" which will take you to the root dir of your pc.
2. Type “ipconfig /all” and press the enter key
3. Make a note of your settings
4. Go to network settings and set your A/R for both providers to OFF and change from standalone to network
5. Go to Configuration and then network settings
6. Change to Static and put in the values that you got by running the icpconfig /all command ie: 192.168.1.100 (you would put in 192.168.1.103)
7. Change back to DHCP and exit and save
8. Reboot the receiver using the switch on it and wait till the green light appears on the khub

After that, you only need to do is turn your AR ON for both providers and switch from network to standalone, exit and save. Picture should come in right away.

__________________

• Want to know when the new FTA Fix files are posted?
• General Helpful Hints on Forum Posting