Limesat Bin V253 - How to load on New Out of Box Receiver

[FTA PRO]

C/P Tech07
Here is a Step by Step Guide for loading a New out of Box Limesat Ultra using the Limesat V253 Bin.
I have just confirmed that this BIN is an all in One BIN , no need to load any prior Factory Bins or Receiver Patch Bins. Only BIN V253 needs loading.

1) Download the Limesat BIN 253 and copy the extracted file to a USB Stick.
2) Plug in new Receiver with Sat cable and Video Out cables.
3) Go to USB, plug in stick and click on USB Menu
4) Find and Click on Limesat V253.BIN and Load it.
5) When asked to reboot, move and click on Yes
6) GUI Appears,No need to click any Defaults
7) Set Time and in Channel Organize, turn off auto roll , ensure Auto TP is ON, and History Recal: ON and Exit
8) Go to Menu , Antenna Set-Up, Tune in Satelite you want, set LNB Freq, LNB Type, Diseqc Port or other switches you may use.
9) Ensure the correct Sat is displayed at the top right (locked in Sat), scroll down and click OK on Search.
10) Only FTA, click NO
10) Once scan is done Exit and it will do a SID Sort.
12) Click on any channel that is up and you should have TV.
If not:
a) CLick on CH 101, if you have a Picture Start a Thread of your own and Post your questions for assistance.
b) If you have no Picture on CH 101, check your sat Cable and be certain you scanned the correct Satellite. If still no Picture, Post for assistance.

For Receivers that are currently up or have had prior Bins loaded:
Follow the similar steps cause this BIN 253 will take the Receiver back to a Near Factory State, so that the Satellites need setting up and Scanning. Time will have to be set up as will any other sections that were set, like Auto TP:ON, Auto Roll:OFF, Recall History: ON
End C/P