Possible fix for no server (2) connection

[Ekim]

Please post your results if you try this.

C/P from n3uspeed2

So for those who can't connect, the procedure is as follows. factory default, 103, factory default, 201, factory default, 253, factory default, network settings menu and turn dhcp on using blue button and auto ip using yellow button. Once the box reboots, go to the network settings menu again and IP-Box info and leave it on that screen. After some time it will connect. I haven't seen one that hasn't. Once it connects, scan channels and watch tv but DO NOT disconnect power to the box or turn the rear switch off. If power is disconnected, it will fail the security check again once it turns on and the whole waiting on the network ip screen menu is needed again.

Do not use the Usb port in the front. Use the one in the back....to avoid a bad data transfer.

[hoppsm]

tried the 103 201 253 as stated but no connect 2,253 no connect, 256 connect 1,it says to wait is overnite long enough,any help thanks. mike

[FTA PRO]

Load v103 factory,boot, default,load v253, boot, default.
Then hit yellow button in IP settings then yes. Only few channels are working on Limesat at this time. Here is the latest list:

Bev
2200 2207 2215
2201 2208 2216
2209
2202 2210
2203 2211
2204 2212
2205 2213
2206 2214


DN
118-119-132-133-134-135-136-137-149-150-151-152-154-170-171
172-173-174-186-187-189-190-191-204-205-312-313-314-318-319-340-341-342-343-344

[hoppsm]

must i have connect2, i have connect1 and some channels,what happens if no connect 2 occurs,and is this few channels to get better, thanks

[FTA PRO]

Some people connect to 1 and others to server 2 if you have some working channels leave it as it is, hopefully Limesat team will improve the channel selection soon.I would wait until then and go from there.

[hoppsm]

10-4 and thanks

[andrea1381]

I have tried a ton of different files and nothing is working. Please help.

[Ekim]

Originally Posted by andrea1381

I have tried a ton of different files and nothing is working. Please help.

If you want your limesat to work you will need the codes from a pay private server.

To run on a private server you need to load the 201 factory file.Then either the 118 private server file or the latest 260.I would load the 118 first then the 260 if needed.

[andrea1381]

We tired that and we are just getting error server disconnect. Could you give me a step by step on how to install this out of the box. I have tried the instructions by loading the 201 then 250. That didn't work either.

I also loaded the 201, 118 then 206 and that didn't work.

[Ekim]

Do you get network ip's?