Limesat Private Server Setup Instructions
--------------------------


NOTE: The main Thing is Do not Load any other Public Server Bin File Between

Factory Bin v.201 & Private Server Bin v.118

save to USB stick the above files.

NOTE: ">" means next step.

01) Set up your receiver with all cables and hook ups > turn on.

02) Plug in the USB stick into the receiver.

03) Press Menu > highlite Installation > press right arrow > press down arrow to Factory Default > press OK >
press right arrow to Yes > press OK > press Exit.

04) Press down arrow to Multi Media > press right arrow > press down arrow to USB Menu > press OK >
highlite "Limesat_Ultra_Factory_V201_14 032010.bin" > press OK > press right arrow over to Yes > press OK >
When asked to reboot highlite Yes > press OK.

05) Highlite Installation > press right arrow > press down arrow to Factory Default > press OK > press
right arrow to Yes > press OK > press Exit.

07) Press down arrow to Multi Media > press right arrow > press down arrow to USB Menu > press OK >

08) Highlight "Limesat_Ultra_v118_PRIVATE_SE RVER_16032010.bin" > press OK > press right arrow over to Yes >
press OK > When asked to reboot highlite Yes > press OK.

09) Highlite Installation > press right arrow > press down arrow to Factory Default > press OK > press
right arrow to Yes > press OK > press Exit.

10) Press down arrow to User Setting > press right arrow > press down arrow to Time Setting > press OK >
press down arrow to time Adjustment > set to what ever your time from GTM, "Eastern set to -05:00 >
Exit > Exit >.

11) Press down arrow to Channel Options > press right arrow > press down arrow to Channel Organization > OK >
press down arrow to Auto TP > set to ON >
press down arrow to Auto Roll > set to OFF >
Exit > Exit >

12) Press up arrow to User Settings > press right arrow > press down arrow to System settings > press OK >
press down arrow to Recall History > set to ON >
Exit > Exit >

13) Press p arrow to Installation > press right arrow to Antenna Setup > press OK >

setup all sats to your specs.

Normal settings are:

Diseqc Number for 119 = 1

Diseqc Number for 110 = 2

Diseqc Number for 91 = 3

NOTE: These settings can be any thing, just set up as your actual hookup of your switch to match.

22KHz set it to OFF (if using normal LNB's).

Press down arrow to Start search > press OK > Only FTA NO > press OK > Once scan is done Exit >
Exit it will do a SID Sort.

Do this for each sat you set up.

============================== ==================== ============================== ==================== =============

SERVER SETTINGs
---------------

NOTE: DOUBLE CHECK EACH SETTING YOU INPUT.

A) Press menu > press down arrow to Network Settings > press right arrow >
press down arrow to Sever Settings > OK > input password "0000" > should be on Server setting > press OK >
on IP/URL press OK > Input the sever name given you (lower case only),
(scroll down untill the lower case board appears) > press green button to save.

B) Press dDown arrow to TCP Port > press OK > enter the port number given to you > press green button to save.

C) Press down arrow to DES Key > press OK > DO NOT erase numbers here just start entering the numbers given you >
press green button to save.

D) Press down arrow to User Name > press OK > enter what was given to you > press green button to save.

E) Press down arrow to Password > press OK > enter what was given you (same as user name) > press green button to save.

D) Press blue button, if all info is correct you will see "connect caid[XXXX]", (where the XXXX is some numbers).

SHOULD BE GOOD TO WATCH TV.

__________________

Please don't PM me with fta related questions, ask them in open forums so others can benefit from them too.