Thanks goes to Homer for this....

C/P Homer


1. Take the Ethernet loop cord and join the lan input with the Wifi input

2. Install the wifi antenna on the back of the box

3. Search for wireless networks on a wireless computer and you will find 3G router which is not a router it is your limesat.


4. Connect to 3G router (your limesat) and right click and select status then properties.

5. Select the network tab, and highlight the Internet protocol Version 4 (TCP/Ipv4) and select properties again. Here you will assign a temporary static IP address between the limesat and the computer for configuration.


6. Type the router IP 192.168.16.2

7. Fill in the Subnet IP 255.255.255.0 and the Gateway IP will be 192.168.16.1 click ok and close


8. Then open up your web browser and type 192.168.16.2

9. You will be asked for a user name admin and a password admin


10. Once you are logged in select the mode tab and then select wireless client mode

11. Click apply and you’re almost done.


12. Return your computers previous settings to enable normal internet usage by entering wireless connections available (notice the 3G router is now gone) Select and connect to your regular network.

13. Right click and select properties. Select TCP/Ipv4 properties

14. Select Obtain address automatically to re-establish your network connection (if you have a static IP return to your previous settings)


15. Reboot your limesat from the back

16. Enter the Menu /configuration/network settings Here you will see the IP you have assigned the limesat 192.168.16.2 change your DHCP to static and your done