To use the Loader.

You will need a Null modem Cable, a 9 pin Serial Port on your Computer and set to Port 1. If your Computer has no Serial port then you will need to to use a USB to serial Adapter connected to your PC, then connected to the Null Modem Cable then connect to your receiver

1) Download and install the Limesat HD MAX RS232 Loader on your Desktop
2) Find the Limesat HD MAX Japan v212_20110812 bin and click open
3) Turn off the Receiver
4) Press and Hold the Power Button on the Front (|) and turn on the Rear Switch
5) Wait for Boot to be displayed on the Receiver Front Panel
6) Bin will Start loading
7) Once it starts to load do not interrupt it.
8) When Done it should reboot, unplug the Null modem cable
9) Go to Menu and insure Bin 212 is loaded

From now on any new bin can be loaded via the Front USB Port

__________________