The new Fix. Unzip the file before loading.

Load the new file and set auto roll to "ON" and wait up to 15 min for the keys to auto roll.

Make sure that the Auto Roll feature is turned "ON." You will find the Auto Roll feature in the Menu options.

If you don't have the picture after 15min Reboot your system using the switch at the back of the receiver.
Click here for the troubleshooting guide.

* Change*
( Main software upgrade )

- AR Fixed

Note:
- Do a hard reboot (power OFF-ON using rear switch) after every update.

Fwank7_Jvvh-Team-PUFF_(Lzma)_V214

(pansat2500, Fortec)
After your done loading this bin to your receiver and hook it up to TV...
Push 8282 on your remote to get to " CAS SYSTEM ".

In there you will see " SET DEFAULT KEY"... Go to " SET DEFAULT KEY "...
Push OK on remote once then EXIT out and picture should come in right away.

If you don't do that then you will get " SOBC " Nag until Keys update.
Do the " SET DEFAULT KEY " and picture should come in right away if the current keys don't change before you put this bin on your receiver.

Attached Files

Pansat 2500 and Fortec Ultra Converted TO Puff FTA Fix May 14.2009.zip (377.0 KB, 16 views)

__________________