Adding New Frequencies in the Pansat 2500A Digital Satellite Receiver

Turn the receiver’s power ON.
Go to “INSTALLATION” and press the “OK” button.
Go to “EDIT TP/SATELLITE” and press the “OK” button.
Make sure the satellite you need to make changes to is shown on the screen. To find the correct satellite name, scroll up or down until it is found and then press the “OK” button.
Choose “EDIT TP”.
The word “NEW” will appear at the bottom of the screen. Press the “OK” button.
Enter the frequency, symbol rate, and polarity and then press the “OK” button to save the information.
Go back to the “INSTALLATION” menu and choose “TP SCAN” and then press the “OK” button.
Once the receiver highlights the satellite name press the “OK” button one more time.
The receiver will highlight the last frequency entered. Press the “OK” button to start scanning the new frequency.
Once the scanning is completed by the receiver, press the “EXIT” button as many times as needed to exit all the different parts of the menu that were used.
Press the “OK” button to view the channel list and choose any of the new channels that were added with the new scanned frequency.

*** Double check the frequency(-ies) you have entered in the receiver to make sure you have a successful scan ***