How to Clone 2700 a to another 2700

DATA TRANSFER(RECEIVER TO RECEIVER)
1) connect null modem RS 232 cable (pin #2 & 3 twisted) between master and slave receiver.

2) Leave the slave receiver power on condition all the time until completion of data transfer.

3) Hook up the master receiver to the TV and select "SW transfer" at "user set up" screen.

4)Select "VER CODE" or "CH DATA" by using
"VOL < or VOL >" button. then press "CH" button to start transfer.during data
transfer,processing percentage will be displayed on the screen.

WARNING! Do not disturb data transfer by touching any remote button. RS232cable, IF cable, RCA cable etc, during data transfer period until "please wait for saving" message disappeared.interruption of data transfer could damage the receiver's flash memory chip which makes the receiver dead and void warranty.