Download Procedure for Pansat 3500S/3500SD

* Connect RS232 Null Modem(#2,3 crossed) cable between the receiver and PC.
* Turn the receiver power ON.
* Open the GTRom Loader V3.40(Pansat 3500S/3500SD).
* Click BIN FILE and select the Bin File to be downloaded.
* Select FILE TYPE and click Download.
* Do not interrupt the receiver power while downloading.
* Press OKafter Download Complete!! Appear on the PC screen.

"*** note 1) If download not works well or LED shows b-70, use boot download method.
2) Click download first and then turn the receiver off and on to start boot download. Dot will move left to right instead of number count. Still not succeed and shows b-70, try one more time.

SD MEMORY CARD OPERATION

1. FLASH UPGRADE (SD CARD to RECEIVER)

a) Insert SD CARD into the receiver SD CARD slot.
b) Select SD memory at Main Menu and press OK button.
c) Select the Bin file downloaded from PC (Version code or CH data) and press OK button.
* * Enter CH Data Backup or Code Backup to find the files previously backed up from the receiver.
d) Wait until the receiver fully rebooted after writing completed (about 40 seconds).

2. FLASH BACK UP (RECEIVER to SD CARD)

a) Insert SD CARD into the receiver SD CARD slot.
b) Select SD memory at Main Menu and press OK button.
c) Select Code Backup or CH Data Backup.
d) Press Red button and select YES then press OK button. Edit the file name up to
7 digits then select OK font and press OK button. Flash Backup will be started
and completed.
e) To delete backed up file, press “Green” button and select “YES” then press
“OK” button.
Note: MMC Card may be also interfaced.

3. MP 3 PLAY

a) Insert SD CARD into the receiver SD CARD slot.
b) Select SD memory at Main Menu and press OK button.
c) Select MP 3 file downloaded from PCand press OK button.
d) Select the MP 3 file to play and press OK button.
e) For multiple MP 3 play, use left/right volume buttons to select or cancel the files to play.All selected files ( up to 20) will be played one by one.