Using X-05BL Loader v35.01 [X-05BL]

1. Turn your receiver off using the switch at the back of it. Then unplug it from the wall outlet.
2. Hook up your receiver to the pc with proper cable and make sure there is no power to it.
3. Open loader
4. Click on Open Files and select the bin you want.
5. Click on download
6. Turn the receiver on and the bin will start to load.
7. Let it run all the way through until the led on the box blinks and then the box will reboot itself and the led will say 00:00 or display a channel number.
8. DO NOT shut down your loader when you see it saying "ok"
9. Manually turn the box off using the switch on it and then back on. The led will display 00:00 , On, or a channel number.
10. You can NOW shut down the loader.
11. Connect your box to the tv, making suree that you plug it into the wall outlet "last"
12. Double check ALL of your installation settings and make sure everything is as it should be.
13. Watch tv.

Night Rider Lights

If you have a . or ---- do this:
reverse steops 5 and 6. As soon as you see the led on the box flicker, click on download. you may have to do it a few times.

Attached Files

Pansat 3500 Loader v35.01 [X-05BL].zip (112.9 KB, 70 views)