USB driver Installation Guide

Your PC should be installed USB driver for 5000HC USB link function to operate properly. Recommend Window XP version or better.

1.Turn the receiver power on and immediately (1-2 second) press OK, EXIT button consequently. Boot version b-XX will be displayed on the front window.

2.Connect USB cable between PC and receiver.

3.Open the PC and click START-- MY COMPUTER--VIEW SYSTEM INFORMATION—HARDWARE—DEVICE MANAGER—double click USB—double click PVR STB—click DRIVER—UPDATE DRIVER—Welcome to The Hardware Update Wizard screen will be appeared.

4.Select Install the software automatically (recommended) and click NEXT.

5.After searches, click Finish – Close.

6.If automatically one not works, select Install from a list or specific location(Advanced) and click NEXT.

7.Select Don’t search, I will choose the driver to install and click NEXT.

8.Click HAVE DISK—BROWSE and open saved usb-pvr and click OK—NEXT.

9.After searches, click Finish –Close.

*Please note that above is just a reference example. You may need different way depend on your computer specification.