Load the new file and set auto roll to "ON" and wait up to 15 min for the keys to auto roll.

Make sure that the Auto Roll feature is turned "ON." You will find the Auto Roll feature in the Menu options.

If you don't have the picture after 15min Reboot your system using the switch at the back of the receiver.
Switch the receiver OFF then back ON using the button on the back of the receiver, the signal will return.

* Change*
( Main software upgrade )
- AR Fixed

Note:
- Always use Remove Device Safely function in USB Menu before remove USB drive (thumb drive/USB HDD)
- Always format USB thumb drive before any update
- Do not extract file direct on to the UBS thumb drive, extract to a folder then copy to USB thumb drive.
- Do a hard reboot (power OFF-ON using rear switch) after every update.

Attached Files

Pansat 9000 Fix Oct.29.2008.zip (1.17 MB, 0 views)

__________________