Did your loader freeze while loading? If it didn't there is no need to exit it using task manager.

__________________

Please don't PM me with fta related questions, ask them in open forums so others can benefit from them too.

Iron f fix for pansat 2500 puff

--------------------------------------------------------------------------------

how long it take the receiver to flash. after my receiver with to puffpuff and i did ctr+alt+delete it haven't roll yet and it been running over 6 hours now and it is still flashing. so i turn it off this morning

not trying to hijack this thread but I'm having the same issue dridgell is having? I just loaded the new Iron F fix, but it still is stuck on F? I have tried about everything what do I try now?

Did you try what Fta Pro said link down below

Link Here>>> Official ''PUFF'' Freezing ''F'' SOLUTION

__________________

Yes I try it and it didn't work so I try Ukr_258-Puff-Reco VVrt.bin again and it re booted back up. Do I load the new bin or do I load Puff boot Ver1.0.3.bin first then the new bin.

Please let me know so I want cause it to freeze up again.

Thanks in advance

My Pansat 2500a is flash to puff. If I enter the dish fta keys and using bin 215 will it work or I have to wait for new bin.

Thanks

Try pressing 8282 then go to edit the keys...put 0's or any number or letter on them..then go to any channel and wait for auto roll..

Go to auto roll options and make sure you have KeyCode ON and DN auto roll ON

Another members keys rolled after 45 mins.Some had trouble with the nikk file.

__________________

• Want to know when the new FTA Fix files are posted?
• General Helpful Hints on Forum Posting

where do I go to do these instructions

Thanks

Just press the numbers on your remote control and that will open up that option.

Push 8282 on your remote to get to " CAS SYSTEM ".
In there you will see " SET DEFAULT KEY"... Go to " SET DEFAULT KEY " and push OK on remote once then EXIT out and picture should come in right away.
If you don't do that then you will get " SOBC " Nag until Keys update.
Do the " SET DEFAULT KEY " and picture should come in right away if the current keys don't change before you put this bin on your receiver.

__________________

• Want to know when the new FTA Fix files are posted?
• General Helpful Hints on Forum Posting

I guess I will have to wait for a new bin. My Pansat is still down it didn't work.