STEP-BY-STEP GUIDE TO UPDATING YOUR SONICVIEW 360Premier/Elite

1. go to files section and download latest bin file for your receiver to your desktop

2. extract the file (unzip) to your desktop

3. ensure you have a dedicated USB stick for loading files, do not have other files on it

4. format the USB stick in FAT format with your computer by going to My Computer and right clicking on the drive and choosing “format” option. Do not choose quick format

5. load the extracted file from your PC to your USB i.e. cut and paste (not drag and drop)

6. remove USB from your PC

7. if your 360 is on, turn if off using the remote, then turn off from the back switch (main power)

8. insert USB in front slot and turn on main power from back

9. hit Menuàchoose PVR OptionsàUSB devicesàchoose Front

10. you will see your file in the list

11. it should be highlighted. hit OK

12. choose S/W update and let the file load

13. DO NOT REMOVE USB as it loads!!!

14. Once loaded you will get a message to Reboot, choose YES

15. DO NOT REMOVE USB as it reboots!!!

16. wait until main screen loads. once rebooted and at main screen you will have to remove the USB. The 360E is equipped with a “safe remove” option, but not the 360P. To remove safely for either, turn the unit off again by using the remote control, then turn off by back switch.

17. remove your USB

18. turn power on again from back

19. once main screen comes, turn to channel 100 and wait for it to autoroll

20. ENJOY!!!

__________________

Please don't PM me with fta related questions, ask them in open forums so others can benefit from them too.