If your 360 Premier takes a turn for the worse, here's a way to revive it:

Basic Process
1] Install factory V0105 .rom file
2] Install system clean up V0119P .rom file
3] Install sat info .sat file (located in V0119P folder)
4] Install latest fix file

**********
If your remote or receiver is frozen/unresponsive, you might need to force load from USB boot menu. remove any external hard drive, reformat your USB stick (with your PC) and follow the loading procedure below

Force Loading Procedure
c/p from post by Greeny

1] Place File on your USB stick
2] Place USB stick in Front or Back of the Receiver
3] Power receiver ON while holding the OK Button on the Front Panel
4] Now use front Panel controls and Select the file to load
5] Press OK button to load

Note: If you are using component cables, you will not be able to view the USB boot menu. Downgrade temporarily to S-video or RCA (Red, white, Yellow) cable

__________________

• Want to know when the new FTA Fix files are posted?
• General Helpful Hints on Forum Posting