Install wiznet on to your PC

1) Factory reset
2) Reboot rear switch
3) Downloaded 8000 sysclean File and updated via USB
4) Reboot rear switch
5) Download 515 and updated via USB
6) Reboot rear switch

iHub to svlan conversion.
1. Save the svlan_usb_wiznet to your USB key
2. Upload the svlan_usb_wiznet to the receiver like you would any other bin.
3. Reboot with rear main switch
4. Open wiznet and "click" search this should find the iHub and show you the version number.
5.Then "Click" upload and find the v4.3 then upload the file.
6.Close and re-open wiznt and version should be 4.3 now.
7.Reboot with rear main switch
7. Upload svlan HD9 BIN to the receiver.
8.Then reboot receiver and wait you will see updating and then "network adapter connected" message.
9.Purchase svlan serial number.

If that doesn't work switch to private server and change server ip address to 62.212.76.70 and port to 8429. Save and then switch back to private sever NO then click exit and yes to save.

__________________

Please don't PM me with fta related questions, ask them in open forums so others can benefit from them too.