As several members have inquired and I didn't see it here, there it is.
As any other sat file it will wipe out all your dish related settings, so write them down before loading.

c/p from another site

Here is the SVHD8000_61-5to129_Spoof_lightning sat file which is a modified SV-HD8000-FIX-SATS-2009-peghede sat file to spoof 61.5 to 129. It has all the transponders for 61.5 listed under sat 129 so all you have to do is select sat 129 in dish settings (It is named Ciel2-E3Spoof for easy recognition) and then use your switch and lnb settings for 61.5. After everything is set press the red button to scan.

**Note that if you are actually aimed at 129 you can not use this sat file because the 129 transponders have been edited to 61.5 transponders.

This is word for word on his proceddure.
Thanks to lightning.



The new Fix. Unzip the file before loading.

Load the new file and set auto roll to "ON" and wait up to 15 min for the keys to auto roll.

Make sure that the Auto Roll feature is turned "ON." You will find the Auto Roll feature in the Menu options.

If you don't have the picture after 15min Reboot your system using the switch at the back of the receiver.
Click here for the troubleshooting guide.

* Change*
( Main software upgrade )

- AR Fixed
Note:

- Always use Remove Device Safely function in USB Menu before remove USB drive (thumb drive/USB HDD)

- Always format USB thumb drive before any update

- Do not extract file direct on to the UBS thumb drive, extract to a folder then copy to USB thumb drive.

- Do a hard reboot (power OFF-ON using rear switch) after every update

Attached Files

SVHD8000_61-5to129_Spoof_lightning.zip (12.7 KB, 6 views)

__________________