Hello Fellow Testers,
Got my sonicview hd up and running. Problem is no pay-per-views,is there a Trick to get these channels? I'm new at this System, Don't get me wrong But I thought this was all in one deal________ Nothing like the DTV.If anyone can, PLEASE Help I hope that I'm the right area for the post

Can you tell us which satellites are you getting. How is your signal quality, which dish are you using, have you scanned the 110 as most PPV's are on that satellite.

__________________

• Want to know when the new FTA Fix files are posted?
• General Helpful Hints on Forum Posting

You posted in the right section and welcome to our site. Make sure your Signal and Quality is over 80 % and you set up your ports right. Port 1 for 110W and port 2 for 119 W or vice versa depending on your setup.

__________________

Please don't PM me with fta related questions, ask them in open forums so others can benefit from them too.

I've got 110 119 But I'm only at 76 ,100 The channels are there but not coming in.Do I need to reset the dish ,if so which way up down or side to side/And thanks for the fast respounce to my post

First thing you can try is do a hardboot turn the receiver OFF and back ON via rear switch. Second step would be do a factory default and rescan your sat's. If that fails you will have to adjust your dish, Quality % is more important then Signal %. So the higher you can bring your Q % the better. To adjust Q you will have to move your dish from side to side so left or right. Good luck and leave feedback please.

__________________

Please don't PM me with fta related questions, ask them in open forums so others can benefit from them too.