Well hello all
It has been awhile since I have been here and its great to be back. Now down for fun. I just bought a SV8000hd and a A-1 Board V2 8psk mod. I need information on how to install it in the 8000.
Now I am testing three recievers and it is really fun. Well any way thats another story.
Bizzaro

To Install the 8PSK Module
==========================
1) Make sure all cables are disconnected before continuing - Failure to do so can destroy your receiver
2) Make a Jumper cable out of RG6 cable about 5 inches long and attach ends
3) Follow these instructions.
4) Reassemble the receiver and attaching all cables
5) Install the jumper cable from the UHF Remote Antenna to the IF Out
6) Power up the receiver
7) Press the Menu Key
8) Select the Install Menu
9) Use your Up and Down arrow key and select External Module
10) The External Module should be "Detected"
11) Set Normal QPSK to "Built-in Tuner"
12) Press Exit

__________________

• Want to know when the new FTA Fix files are posted?
• General Helpful Hints on Forum Posting

You can download the picture instructions from here: http://www.ftaprofessionals.tv/sonicview-8000-hd-instructions/3424-sonicview-sv-8000hd-s-module-q-adapter-installation-guide.html

__________________

• Want to know when the new FTA Fix files are posted?
• General Helpful Hints on Forum Posting