I lost PPV on my 360 Premiere reloaded the January file you have, and still no PPV. My Viewsonic UL is fine. Any ideas?

A hard reboot should fix it if it is scrambled.

If you are completely missing the channels than try to press the "SAT" button on your remote control and pick echo package. If that did not help do a factory reset and rescan the satellites.

__________________

• Want to know when the new FTA Fix files are posted?
• General Helpful Hints on Forum Posting

I had to factory reset and reload, but now I have almost every channel doubled...Using the guide, there are two of every channel. Only one gets a signal though....strange?

Your dish settings are wrong, you ended up scanning the same satellite twice. To fix it do a factory reset using your remote control, that will delete all of the channels so that you can do a fresh scan.

In your dish settings you will need to change the diseqc switch port.

Most of the time 119 is on port 1 and 110 on port 2 but your settings may be different so just change the ports until you see which satellite are you getting in the top right corner.

__________________

• Want to know when the new FTA Fix files are posted?
• General Helpful Hints on Forum Posting