please go thru with me on set-up. here's what i read and did. brand new. load factory bin.lastest bin file. reset.loaded birds.connected hub and then go and do what? thanks. tried your post on how to see if the hub is connected but don't understand how to view on tv. hub is connected to wireless router and so is lap top. thanks, one2.

plug hub into stb,connect with cat 5 wire to ? and then enter info where ? elite unit

one2 so you got your sonicview and ihub and your ready to watch tv, think we can help ya on that if your still on line

__________________


Testing: Sonicview 4000,Viewsat Xtreme,Ultra,Lite,Captiveworks 800,Nfusion
Nuvenio HD,Sonicview 360 Elite(Ihub), Conaxsat Duo(&hub)

Life is too short to wake up with regrets.So love the people who treat you right.Love the ones who do not,just because you can.Believe everything happens for a reason.If you get a second chance,grab it with both hands.If it changes your life,let it.Kiss slowly.Forgive quickly.God never said life would be easy.He just promised it would be worth it.

You do not have to be crazy to be my friend, but it sure helps.................

hey hello : well last night i tried and treid till i drank too much.niether the hd or the elite can i make go. have both new. went the extra mile( $) to have both. can i get some help to connect both, let's start with either or. i have them both ready. but i do not understand WIRELESS CONFIG. THEY BOTH DON'T TALK TO THE ROUTER'

How do I setup the iHub on a wired home ethernet network?

Connecting your Sonicview iHub to your home network is very simple. Basically, plug one end into the receiver and the ethernet port using a standard cat5 or cat6 cable to an available port on your router, switch or hub.


How To Set up SV IHub

1. Load bin ( over current file if not virgin receiver)

2. Plug dongle

3. U will see prompt that dongle connecting (can take up to 30 secs)

4. Click menu-installation-ipconfig

5. Setting type DHCP

6. USE DNS YES

7. Domain name www. svftaiks.com

8. Server port 1920

9. Serial number put in correct serial number , to avoid problems.

10. Go to apply and click OK (don’t exit or it wont save you must click apply)

That’s it watch tv

NOTE
If your screen turns to black and white press yellow button , then up arrow , then left ....this should turn the color back on check your guide and menu if the guide is black repeat to return to NTSF and this should return all color.

Look at bottom of screen for how to input the letters.

How do I enter the serial number for iHub?

The serial number for the iHub as well as many electronic devices is in hexidecimal. Hexidecimal (commonly referred to simply as "Hex") only has 16 characters. They are the digits 0 through 9 and the letters A through F. If you look at the serial number for your iHub you will notice the letters are small lower case letters and may be hard to read. For instance the letter "e" may look like a letter "o" with a slash through the middle but trust me it is an "e". When you go to the setup screen for entering the serial number look at the bottom of your screen and you will see a key for which remote buttons to use for the letters. Now just simply enter them and save and you are done.

Click here to Download the Sonicview iHUB Manual.

__________________

• Want to know when the new FTA Fix files are posted?
• General Helpful Hints on Forum Posting

Ps. Try resetting your modem and router. Unplug the power cable for 10 min and than connect it back but modem first than the router than the iHub.

If that is not working try connecting it directly to the modem.

__________________

• Want to know when the new FTA Fix files are posted?
• General Helpful Hints on Forum Posting