Hello...I purchased a new Sonicview 8000 HD with I-Hub, since my old CoolSat 7000 has been down for so long and I read on Forum that SV w/I-Hub was working, on some/most channels. I set up the SV STB, but I'm still getting message "Scrambled" and I'm hoping you may be able to help me to find what the problem is. I loaded the SV factory file/firmware and the latest SV 8000 IHub Fix file from Forum and then searched and found satellites 110W & 119W that I'd been using on Coolsat and was able to load the channels, but they still say "Scrambled". I followed the IHub manual for setting it up/IP Config., and rebooted and when it comes on now, after a bit, a window flashes up stating "Network Adapter Connect", which I believe indicates it recognizes the IHub and is trying to connect to internet, but it must not be able to. The IHub manual said to check the website (www.svftaiks.com) which I've been trying, but it won't come up; states "Cannot Display Page, etc.". Can you tell me if the site I'm trying is correct and if it's down or something? This frustrated rookie would really appreciate any help or advice you can offer.
Regards,
twobears

Here is a quick way to check if your SV ihub is connected to the server. Try this:

**Do it from your TV. Press Menu on the remote Go to ip config, change "Use DNS" from "Yes" to "No". If you see an IP address where the www . svftaiks . com once was then you are connected to the server. If you see 0.0.0.0 server is down and you are not connected.**

If your inital set up (configuration) is wrong then that could also be a reason you are not connected to the server. But if you configuration is right the above test will work to tell you if the server is up or down. I have tested this and it works.

Here is some good info on iHub:

Click here to Download the Sonicview iHUB Manual.

__________________

• Want to know when the new FTA Fix files are posted?
• General Helpful Hints on Forum Posting