i did what fta Pro said to do in the thread; ihub Setup procedure that works , and now everything is gone. i have a sv 360 p with ihub. I think what really messes up my reciever was the network download. I did the whole change dhcp to static, and change the ports to 1920, but still nothing. Nothing i have tried is working, and i have done everything you guys have told me to. Plz help me...

What do you mean by everything gone, if you had everything working before why follow that procedure that i posted for ihub? If your receiver doesn't work do factory default and load factory file and start over setting up your ihub. If it's network download error it can be fixed by doing this:

Go back into IP Config and set it up again.Change DHCP to Static and change local port to 1920.Then change back to DHCP and go down to server port and change it to port 1920 then click APPLY.

If that doesn't fix it something else is wrong, either with your receiver or ihub or you have the settings wrong.

PS. Please start only one thread with the same question, i deleted the duplicate thread you started.

__________________

Please don't PM me with fta related questions, ask them in open forums so others can benefit from them too.

i did what you said because my reciever was freezing too much, so i thought this would fix it. I did change the DHCP to Static and the whole thing but still nothing is working. I did a factory default but still nothing. Plus i downloaded the system cleaner, and then the factory bin file, and then the latest i hub fix... but nothing. I have all my settings correct ( i checked everything over), but could you plx tell me what the settings are just in case... thx. Do you have any idea how to fix this problem. Plz help me. (i have a sv 360 p with ihub)

PS. i accidently posted two threads with the same question.... sorry

Some freezing is normal it's not your set up it's SV IKS servers. Here is the set up again.

1. Load bin ( over current file if not virgin reciever)


2. Plug dongle


3. U will see prompt that dongle connecting (can take up to 30 secs)


4. Click menu-installation-ipconfig


5. Setting type DHCP


6. USE DNS YES


7. Domain name svftaiks.com


8. Server port 1920


9. PUT IN YOUR SERIAL NUMBER BE CAREFUL THE LETTERS ARE VERY SMALL

Entering serial number for iHub

The serial number for the iHub as well as many electronic devices is in hexidecimal. Hexidecimal (commonly referred to simply as "Hex") only has 16 characters. They are the digits 0 through 9 and the letters A through F. If you look at the serial number for your iHub you will notice the letters are small lower case letters and may be hard to read. For instance the letter "e" may look like a letter "o" with a slash through the middle but trust me it is an "e". When you go to the setup screen for entering the serial number look at the bottom of your screen and you will see a key for which remote buttons to use for the letters. Now just simply enter them and save and you are done

__________________

Please don't PM me with fta related questions, ask them in open forums so others can benefit from them too.