i have a sv 360p with ihub, and my ip config link is not coming. nothing has been working for 2 days now, so i decided to factory reset. After that i loaded the factory bin file, and scanned all the channles, and when i went to fix the ip config, it wasn't there. Also the adaptor connect sign is not coming up, but the lights on the ihub are on. i took it off, unplugged it many times but still nothing. Aswell as the network download is not showing up. What shoud i do. could you plz give me a step by step guide. Thx

I think you should do a factory deafault and start all over,,,load in new factory and then the newest fix then reset ur settings back up then scan ur sats then hook up ur Ihub I think thats how you would do that not real sure about the Ihub myself,but you need to get back the missing stuff and a default should do it
what happened I thought you was up and running a few days ago?

__________________

ya i was running gr8, but then it started freezing too much, so i decided to do what Fta Pro had siad to do in the thread ihub procedure that works, but then everything was gone. I did what you told me to, the ip config, andc adaptor connect sign came, and the network adaptor sogn came, but after like 3-5 mins it was gone again. none of the channles are working... still.... do u have any advice, plz help me. could you tell me the settings i should have, and what i can do to get me up and running again. thx for all the help...

here are the settings?

Below is what most have:


Menu===>Installation then 0000 or 0937 or 2668 or 3570 then antenna setup then side arrow to ECHOSTAR 7=119W.then do the same for ECHOSTAR 8,10=110W,
..............EchoStar 7=119W........................ .EchoStar 8,10=110W.
LNB Power................ON....... .................... ...............ON
LNB Type..............Standard.... .................... ..........Standard (Dish Pro change to OCS-DP)
LNB Freq...............11250...... .................... .............11250
22kHz.......................OF F................... .....................OFF
TP Freq.................12239 Or one that closer........................ ..12224 Or one that closer.
search option............ALL......... .................... ..............ALL
DiSEqC 1.0..............Port 1............................. ..........Port 2, (This should match the cable on the switch).
Motor......................OFF .................... ........................OFF
Legacy SW..............NONE.......... .................... ............NONE

__________________

That procedure that works i got from a friend who got it to work that way that's why i posted it so it could help others. In your case you can try this once you are done factory reset and loading factory file for your receiver.

Load the latest iks file Premium v240.
Scan sats you are interested in.
Plug dongle into serial port of receiver
Plug ethernet cable from router to dongle
Go into installation IP Config and enter:
Setting Type: Static
Local ip: 192.168.1.101
Local Port: 1920
Subnet: 255.255.255.0
Gateway: 192.168.1.1
Use Dns: Yes
Server IP: svftaiks.com
Dns Ip: 208.67.222.222
server port: 1920
serial Number from Dongle
Apply

__________________

Please don't PM me with fta related questions, ask them in open forums so others can benefit from them too.

Thx 4 ur help, but could you plz tell me what 'iks file Premium v240 is, and where i can find it. I can't seem to find it. Thx Also shoud i change the setting type from static back to DHCP?

HERES THE LINK FOR V240>>> http://www.ftaprofessionals.tv/sonicview-360-premier-fta-fix-files/4689-sonicview-360-premier-dongle-ihub-fta-fix-june-30-2009-a.html

__________________

I have done what ypu told me to, but i'm still not getting any channels. Then i read some of the posts, which are saying some of the channels aren't working at all. Is there a channel i should be getting. Could u plz tell me. Thx

200 CNN works most of the time.

__________________

• Want to know when the new FTA Fix files are posted?
• General Helpful Hints on Forum Posting

I have done everything that is on the site, and i still can't get anything. Just channel 101(Dish network advertisements) is working. Can u plz help me... it has been a couple of days now, with nothing working. I did factory reset, and downloaded the system cleaner, and the latest ihub fix, the factory bin files... on and on. Alll my settings r correct including the time zones and stuff. I set up ip config again, and did the whole change dhcp to static, and hange the ports to 1920... still nothing. I have done these syeps many time, but i'm not getting anything. I let it sit on one cnl for hours but still nothing is coming. What can i do plz help me...... THX :P