I followed all instructins to put on new ihub ipconfig is on screen but when i
try to get the menu to input info for ihub the mesage says (NETWORK ADAPTER ISNT READY) and goes back to normal menu what do i need to do

air2398 do a hard boot (cut off receiver from behind and then back on) and see if it says network connected. If so, then try to go back into menu and to ipconfig and set it up again. Let us know if that fixes the problem

__________________


Testing: Sonicview 4000,Viewsat Xtreme,Ultra,Lite,Captiveworks 800,Nfusion
Nuvenio HD,Sonicview 360 Elite(Ihub), Conaxsat Duo(&hub)

Life is too short to wake up with regrets.So love the people who treat you right.Love the ones who do not,just because you can.Believe everything happens for a reason.If you get a second chance,grab it with both hands.If it changes your life,let it.Kiss slowly.Forgive quickly.God never said life would be easy.He just promised it would be worth it.

You do not have to be crazy to be my friend, but it sure helps.................

I did all that and it says network connect then i go to menu and ip confing
then I get network adapter isnt ready

air2398 unplug the ihub from the receiver while the power is on, hard boot the receiver(cut it off from back and then back on). Connect the ihub back up after the receiver boots back up and then do another hard boot again leaving everything connected. Then you should see adapter connected and then go into ipconfig and see if it get pass that adapter isn't ready problem. Let us know

__________________


Testing: Sonicview 4000,Viewsat Xtreme,Ultra,Lite,Captiveworks 800,Nfusion
Nuvenio HD,Sonicview 360 Elite(Ihub), Conaxsat Duo(&hub)

Life is too short to wake up with regrets.So love the people who treat you right.Love the ones who do not,just because you can.Believe everything happens for a reason.If you get a second chance,grab it with both hands.If it changes your life,let it.Kiss slowly.Forgive quickly.God never said life would be easy.He just promised it would be worth it.

You do not have to be crazy to be my friend, but it sure helps.................

Same message as before lights are flashing but not ready message still

I am now running cable thru wisnet to i hub all the numbers come up but right hand window in wisnet says not connected. your thoughts

To flash a virgin Ihub:
You need to connect the Ihub to the reciever
go into IP Config screen
Change Static to DHCP and then press ok on apply
You will now have a DHCP address in the correct range

The default static IP on the Ihub is 192.168.11.X
The 11 is out of most peoples ranges and when you try to flash it
You will corrupt your Ihub

If you have alread corrupted your Ihub
meaning when you turn it on and it doesn't recognize it (no Ip config under installation)
Then you need to fix it using this:

Open up the Wiznet flash config tool
note your Ihub's information

local ip: 192.168.11.2
Gateway: 192.168.11.1

these values will only work with a network that are 192.168.11.X
Since these values don't match my network I changed it to settings that match my network

Local Ip: 192.168.1.102
Gateway: 192.168.1.1

If you don't know your range or gateway then hit the start menu on the bottom of windows
find the run tab
type in cmd.exe
a black DOS window will open
now type in ipconfig
use the information in the window to change the value in your Ihub
after you are done then left click on the setting button on the bottom of the Wiznet config tool
It will tell you processing and then you can research and see that indeed the IP address has been changed

__________________

Please don't PM me with fta related questions, ask them in open forums so others can benefit from them too.

I now have no ipconfig and wiznet showing v.82

air2398 you have corrupted/debricked your Ihub, that is ok and lets see if we can fix that. Click the link below Also Boss(Fta Pro) has put pretty much same info above, this just has a few extra steps in it. This is link from 360 elite area, but as you read you will see that this is for Sonicview 360e/360p and 8000hd as well. If your going to have to program your receiver as well, make sure to go after right files for your receiver brand Let us know if you are up and running

http://www.ftaprofessionals.tv/sonic...files-v82.html

__________________


Testing: Sonicview 4000,Viewsat Xtreme,Ultra,Lite,Captiveworks 800,Nfusion
Nuvenio HD,Sonicview 360 Elite(Ihub), Conaxsat Duo(&hub)

Life is too short to wake up with regrets.So love the people who treat you right.Love the ones who do not,just because you can.Believe everything happens for a reason.If you get a second chance,grab it with both hands.If it changes your life,let it.Kiss slowly.Forgive quickly.God never said life would be easy.He just promised it would be worth it.

You do not have to be crazy to be my friend, but it sure helps.................

UP AND RUNNING also just a note on wiznet if you click on (OPTION tab) password enble should be unchecked that made things work faster for me.Thanks a bunch just a note to others reading I never touched router stuff before and its a little wild and got alot of numbers to mess with but once you got it then it will run.