Steps to take:

1. Connect iHub to receiver

2. Leave Power on, on the receiver, but turn power off from the front panel (so that the time is displayed)

3. Connect ethernet cord to iHub, then directly in to ethernet port on computer, this part is where it is tricky and you might have to wait until you see "limited or no connectivity"

4. Open up the WIZ program, click search until it displays the fields with some sort of info. Once it does, your in luck! No BS!!!! Now you need to skip around a little for this next step.

4 1/2. Make sure Static is checked, you should now see the fields able to change settings. Make your settings exact to mine.

Local IP: 192.168.1.101 Port: 1920
Subnet: 255.255.255.0
Gateway: 192.168.1.1

Operation Mode: Mixed

Make sure USE DNS is checked!!!

DNS SERVER IP: 208.67.222.222
Domain Name: WWW.SVFTAIKS.COM

Now click on Setting, if it gives you an error after clicking, click setting again until it takes. Once it does, close the WIZ program and follow on to next step.

5. Now that you can see the iHub current info and the settings, now what you want to do is check on the back of your router, this part is crucial... Make absolute certain that your PC is plugged in to the first outgoing port on the router. And now unplug iHub from back of computer, plug it in to the 2nd outgoing port on the router (the ip that the router assigns to this port should be 192.168.1.101 by default.)

6. Open up WIZ program again, and click on Search until it finds your iHub, notice that the settings should read what I typed above? If it does then continue on, if not, then go back and retry until it does!! So now that it says the settings that we want it too, we still see the v82.0 right? Lets get rid of that now.

7. Go to Start>Run>CMD>ipconfig

Now type: ping 192.168.1.101 (if you get a series of replies, we will be able to load 1.4 with no problems at all!) Thats right, you can click thanks!!

8. Now bring the WIZ program back up, and I want you to click on Upload tab, you should be able to at this point, make sure you have extracted the 1.4 bin to your desktop. and then choose that file. You should instantly notice it start uploading with little bars with pretty much no hanging at all.

__________________

Please don't PM me with fta related questions, ask them in open forums so others can benefit from them too.

till no ip in my reciever and not connected in wiz