Below is what most have:
Menu===>Installation then 0000 or 0937 or 2668 or 3570 then antenna setup then side arrow to ECHOSTAR 7=119W.then do the same for ECHOSTAR 8,10=110W,and NIMIQ 1,3=91.0W.
..............EchoStar 7=119W........................ .EchoStar 8,10=110W.
LNB Power................ON....... .................... ...............ON
LNB Type..............Standard.... .................... ..........Standard (Dish Pro change to OCS-DP)
LNB Freq...............11250...... .................... .............11250
22kHz.......................OF F................... .....................OFF
TP Freq.................12239 Or one that closer........................ ..12224 Or one that closer.
search option............ALL......... .................... ..............ALL
DiSEqC 1.0..............Port 1............................. ..........Port 2, (This should match the cable on the switch).
Motor......................OFF .................... ........................OFF
Legacy SW..............NONE.......... .................... ............NONE

NIMIQ 1,3=91.0W
LNB Power...........On
LNB Type............standard (Dish Pro change to OCS-DP)
LNB Freq.............11250
22kHz.................OFf
TP Freq...............12224 or one that is close.
DiSEqC 1.0...........Port 3 or 4 (this should match the cable on the switch).
Motor.................OFF
Legacy SW..........NONE
Good Luck.

__________________

ok heres what is what this is for the Elite but pretty much the same for the premier


satelite - (echo) or what ever sat ur loading

Connection - seperate

LNB type - single or OCSDP if you have a D!shpro

LNB Frequency 11250

22khz - Off

LNB power - On

Transponder 12224 for sat110 or 12239 for sat 119

search option - All

Network search - On

Diseqc - port 1 for sat 119 port 2 for sat110 port 3 for what ever other sat you run or depending on how you have it wired in

Motor - Off On if you have a motor

Legacy switch - Off

__________________