my sv 360 premier booted 3 times, and after that it stopped working. Ip config, and everything is working, and the settings are all corect. I am getting scrambled, or bad channel, what should i do PLz help. THX

hi sargodha. what reboot did you do ? from the back switch ? or from the menu ? if you factory defaulted you need to rescan your birds and reset your settings. if you rebooted from the back and your ipconfig is like it was when it was working,hopefully you wrote it down for refeeence then check your setting in wiznet and make sure it is connected.does it have 1.4 or 82 on the top left of wiznet.also check your router ,unplug it,reset it by unplugging all connections and hold the button down for ten secounds. then plug everything back in and turn back on.let us know.

i didn't reboot it myself, i was changing the channel, and it booted.

ok reboot from back switch,turn off and then back on after ten secounds.

the web site is showing to have feed problems at the present time.it is off and on. it is up right now on my in.

lucky u, but mine isn't working at all, do i need to update my ihub

In ip config

USE DNS YES change YES to NO and see if you have 77.93.75.89 or 0's under NO.
If it 0's the enter 77.93.75.89 then click apply and wait.Then later you can change back to YES the click apply

If you have bad or weak Q/Quality your channels will not work.


I booted up my sv and it showed adapter connect but I still got NO SEVICE OR SCRAMBLED message and I did what I told you above and it started working.It seems to me that I have this problem every time rear power is turned off at night because I do not let IKS run all night.

__________________

all my ipconfig settings are right, when i change use dns to no, there is a number 77........ any other sudgestions

Tell us what your internet connection is.Is it DSL,dialup,wireless and how is your receiver connected.Cable or wireless and if your using a cable what type CAT5 or crossover?Let us know.

__________________

i am using dsl internet, it is connected with a cable, the ethernet cat5. My reciever was working a day ago perfectly, untill it booted.