Hi there diazjo2k8 yes the fix you used is the right one. Did a little more reading and have changed my post a little, your hub is new and should be set to the 1.4 already if I have understood right, so that is one that you do not have to worry about,I would check all your connections from outside in.

__________________


Testing: Sonicview 4000,Viewsat Xtreme,Ultra,Lite,Captiveworks 800,Nfusion
Nuvenio HD,Sonicview 360 Elite(Ihub), Conaxsat Duo(&hub)

Life is too short to wake up with regrets.So love the people who treat you right.Love the ones who do not,just because you can.Believe everything happens for a reason.If you get a second chance,grab it with both hands.If it changes your life,let it.Kiss slowly.Forgive quickly.God never said life would be easy.He just promised it would be worth it.

You do not have to be crazy to be my friend, but it sure helps.................

I have great signal until i add the ihub fix, connections are great... hooked up old dish receiver to varify 110 & 119 are at 97% locked. Hook up 8000hd signal strength is 70% w/ 99-100% quality. Got all the files loaded(sats file, channel list, ihub firmware) signal strength is still at 70/100. As soon as I load the fix it reboots ,no channells work so I check sat signal & its 6-7strength & 0 quality. if I do factory reset sat sig & qual back to 70/100 But ihub does not do its job...lights work when plugged in...its pretty to look at............

It could be that the channel list and sat file that you are using are not compatible with the fix. Try loading the factory file and the last fix only ( you will need to setup the dish settings and scan for channels). If the is not helping, turn off the receiver and disconnect the LNB cable for few minutes and try again.

Other thing that works is to go to your Dish settings and turn off the LNB power for 1min and than turn it back on.

__________________

• Want to know when the new FTA Fix files are posted?
• General Helpful Hints on Forum Posting