What is the receiver LED's Showing?

__________________

or else you could maybe try this even tho you cant see tv screen but maybe it will work...


ok on ur remote hit Menu then click over to the right one time then go down 2 clicks and (if menu is locked hit 0000 then click ok most likely it's locked) and then click left one time and then hit ok and then hopefully maybe it will default

__________________

guys I am so gald you are trying to help me
i tried all of them and nothig worked yet
and i am not giving up yet so i will let you know how it
workes out
thank you again

if you thik of something else let me know

This should fix your problem:

If your remote or receiver is frozen/unresponsive, you might need to force load from USB boot menu. remove any external hard drive, reformat your USB stick (with your PC) and follow the loading procedure below

Force Loading Procedure


1] Place File on your USB stick
2] Place USB stick in Front or Back of the Receiver
3] Power receiver ON while holding the OK Button on the Front Panel
4] Now use front Panel controls and Select the file to load
5] Press OK button to load

Note: If you are using component cables, you will not be able to view the USB boot menu. Downgrade temporarily to S-video or RCA (Red, white, Yellow) cable

__________________

Please don't PM me with fta related questions, ask them in open forums so others can benefit from them too.