cannot get wiznet to work or connect is there a link for instructions to get it working.

Ok, now that we have new files what do we do ?
First we make sure we watch a channel 200 CNN will do just fine.
Make sure iHub is hardwired to the router, wireless may cause problems.
Launch WIZNET on PC after you unzipped the file in a known location.
Click SEARCH at the bottom of WIZ screen, once the board list has filled up click UPLOAD, select the bin file you want ( 1.9 ) and let it process.
At the end you should see “ Complete uploading “ like in the attached pictures.
About half way in the UPLOAD process you will lose TV, that’s normal don’t panic.
Perform another SEARCH, confirm that top left corner displays version 1.9 and you can close WIZ.
Unzip the file for your model, put it on a USB stick and plug it into receiver.
Open USB file list and select S/W Update to receiver.
If it worked before, after reboot you should get TV back, the IPCONFIG field in MENU looks a little different than the previous one check attachments.
That’s it, enjoy.

click on attached thumbnails to make bigger to see.The third attachment is of the SV 8000 so the Premier and Elite will look a little different.The ipconfig box will be the same.

Attached Thumbnails




and here is the wiznet loader and the newest 1.9 file
Contains the 1.9 file for the iHub and the wiznet loader

Attached FilesWIZnet.zip (639 Bytes, 11 views)

ihub_V1.9.zip (15.9 KB, 11 views)

use the wiznet to load the 1.9 file


and then you need to load the newest file into ur recviever
which came out today
and will not work unless ur Ihub has 1.9 file in it

__________________

Thanks for the info I did more reading in this site and I read that we are not to attemp any upgrades while the site is down

Server is somewhat up again, freezing still but it's working.You can go ahead and upgrade ihub to version 1.9 and load the new file for your receiver.

__________________

Please don't PM me with fta related questions, ask them in open forums so others can benefit from them too.

wiznet board won't populate after clicking search whats wrong

If it never has connected/populated.It is most likely a pc firewall setting not allowing connection.Check that and you can try shutting down everything and reboot with the receiver last.

__________________

Firewall was my first thought its already down.

COULD ANY SETTING IN THE ROUTER CAUSE THIS PROBLEM?

There is a setting to allow file and internet sharing through the same internet connection.It is more than just turning off firewall.I sent you a pm like you did me I don't know how you missed mine.

__________________

Hello guys ,anyone knows what is going on with the Wiznet thing, it wont open keeps telling me that is just a shortcut blablabla , i need to upgrate my ihub but i can't get to open wiznet , can someone help me please . thanks in advance

Delete the wiznet shortcut and find it in your programs and open it there or delete program and redownload program again so its not a shortcut.Clink the link below.Let us know if you need more help in running the program and updating to 1.9.




http://www.ftaprofessionals.tv/sonic...11-2009-a.html

__________________